Traulsen G12001 One Section Reach In Freezer 2 Left Hinge Doors 115v
 
Traulsen G12001 one-section reach-in freezer comes with three epoxy-coated shelves that have a wire design, utilizing gaps to promote even, complete air circulation. A guard in the cabinet also encourages air to flow through the designed path. Preventing users from storing items too close to the wall and disrupting airflow, this piece is built into the wall. Half doors on the unit separate the cabinet into smaller sections than units with one full door, minimizing cold air loss when a door is opened. The door self-closes to prevent cold air from escaping rapidly, while the stay-open feature at 120 degrees ensures loading items is convenient.
 
Operators can adjust the temperature in this Traulsen G12001 single-section reach-in freezer from -5 to 0 degrees Fahrenheit with microprocessor controls, and the LED display shows the temperature in Celsius or Fahrenheit. The unit uses R290 refrigerant, which is metered by a valve to achieve the desired temperature.
 
 
FEATURES
23.37-cu.-ft. interior space
3 corrosion-resistant, epoxy-coated steel wire shelves
225-lb. capacity per shelf
Load-Sure cabinet guard prevents storage too close to the walls, which disrupts airflow
Anodized aluminum exterior sides and interior
Stainless steel louver, exterior front, and doors
Galvanized steel exterior top, back, and bottom
2 left-hinged half doors on the front
Door lock eliminates theft risks
Stay-open door feature at 120 degrees for loading and unloading
LED cabinet lighting ensures item visibility
Exterior-mounted light switch
2-in.-thick, high-density polyurethane insulation is foamed in place
Built-to-last EZ-Clean door gaskets
(4) 6-in. locking casters
1,500 BTU
Microprocessor control
LED display can show temperature in Celsius or Fahrenheit
Temperature holding range: -5 to 0 degrees F
Uses R290 refrigerant
Refrigerant is metered by a thermostatic expansion valve to maintain set temperature
Top mounted to create separation from dust on the floor
Evaporator coil is not in the food zone, maximizing usable interior space
Front-facing condenser coil
 
 
Specifications
29 7⁄8 in. W x 35 in. D x 83 7⁄16 in. H
9.7 A, 6.2 kW, 1⁄2 HP
115 V/60 Hz/1 phase 9-ft. cord with a NEMA 5-15P plug
Weight 420 lbs